Hi Everyone,
The Raley's room is booked for January, so I decided to schedule a social
back at Kupros. Sen said he wanted to do a dry run of his embedded video
player. The last I heard back from him was late December and we are now
a week away.
Raley's Natomas has a room, yet I do not have a confirmation, so I am
not going to schedule something that is uncertain.
Social at Kupros on 21st St. is what I decided.
1217 21st Street
Sacramento, CA 95811
Tuesday, January 16, 2024
6:30pm - 8:30pm
See you there!
Brian
--
Brian Lavender
http://www.brie.com/brian/
"There are two ways of constructing a software design. One way is to
make it so simple that there are obviously no deficiencies. And the other
way is to make it so complicated that there are no obvious deficiencies."
Professor C. A. R. Hoare
The 1980 Turing award lecture
Thanks!!
I found an Intermac 15 used on ebay. Bought it. I'll give it a try. I knew things like this existed, but I couldn't find it.
-Gary
---- Forwarded message from bob r <bob.dev.oak(a)gmail.com> -----
Date: Thu, 4 Jan 2024 18:03:33 -0800
From: bob r <bob.dev.oak(a)gmail.com>
To: Gary <saclug(a)garymcglinn.com>
CC: lug-nuts(a)bigbrie.com
Subject: [Lug-nuts] Re: A problem, a phone, and a solution
Found it. It is called an astronomical time switch.
Mine is the RT-200-I Made by Watt Stopper. But it is a few years old.
The -W version is available on amazon:
https://www.amazon.com/Wattstopper-RT-200-W-Astronomical-Timer-Switch/dp/B0…
On Thu, Jan 4, 2024 at 5:40 PM bob r <bob.dev.oak(a)gmail.com> wrote:
> We have one of those switches you install in the wall, instead of a normal
> light switch, and it automatically adjusts changes to when the sun sets and
> rises and also accounts for the time changes. It always goes on at sunset
> and always goes off at sunrise. Once every 2 years or so, I have to reset
> the time back a few minutes, but other than that you just program the time
> in once and you are good to go. Best thing ever.
> I can't remember what the guy called it, but it sounded like an "automatic
> lightswitch" but that is not it.
> I even have an extra one. Let me try to find it....
>
>
>
> On Thu, Jan 4, 2024 at 4:07 PM Gary <saclug(a)garymcglinn.com> wrote:
>
>> I hope you find this entertaining.
>>
>> I have a very simple problem. I have a secondary structure on my
>> property some distance from my house. It has a light that I want to come
>> on sometime after sunset and turn off sometime before dawn.
>>
>> There are a few issues.
>>
>> 1. The light is visible from the road, so it should look nice. Adding a
>> socket with a day night sensor isn't possible. It won't fit inside the
>> current lighting fixture.
>>
>> 2. The WiFi from the house does reach this structure, but it isn't very
>> strong. My laptop can pick it up just fine, but the Shelly home automation
>> switch I bought doesn't see it.
>>
>> 3. I have an extra phone that I use only for 2 factor authentication and
>> a few other minor uses. I have a $10/month plan for that phone.
>>
>> Note: The Shelly is installed. It can't see any WiFi, so it won't let
>> me set up a schedule because it can't see a clock. Not withstanding the
>> fact that I could tell it what the time is and even $0.20 chips have a
>> reasonably accurate clock. We aren't flying planes or running nuclear
>> reactors here. But it will let me tell it how long to wait after I turn it
>> on to turn it off. This uses a clock, but I guess it slipped through.
>> It's from Romania. I manually turn the light on every evening.
>>
>> Plan 1
>>
>> Move the second phone to the secondary structure and just use VNC to get
>> any messages. Turn on the hot spot and have the Shelly get the time from
>> that.
>>
>> Result: I abandonded this plan when I couldn't VNC into the phone from
>> the world. Lo and behold, this only works if you access the phone using
>> WiFi. Since I want to use the hotspot, this means being connected to the
>> phone's hot spot. Which means I have to be there, which defeats the whole
>> purpose.
>>
>> Plan 2
>>
>> Set up my rPi on the hot spot from the phone. Use a remote ssh tunnel to
>> access the rPi and then access the phone.
>>
>> Result: The remote tunnel is blocked. I only did some brief reading, but
>> you have to do some packet inspection to do this.
>>
>> Plan 3
>>
>> Use the slow network from the house to contact the rPi on a second
>> external and good antenna. Use the rPi's native antenna to contact the
>> phone.
>>
>> Result: This works. But it is incredibly slow. The clock on the phone
>> that I see when using vnc updates every 5 minutes. But despite this, it
>> seemed pretty stable. Not really workable though.
>>
>> Note: Although an ssh remote tunnel won't work, sshfs apparently will.
>> I wouldn't have guessed that.
>>
>> Note: Devices that are using the phone's hot spot can't see each other.
>> They can only see the phone. This would mean that if I connected the
>> Shelly to the hot spot, I wouldn't be able to see it from another device,
>> like the rPi that I can talk to from my house. However, the phone can see
>> all of the connected devices. And the rPi can VNC to the phone.
>>
>> Next plan
>>
>> Connect the Shelly to the hot spot. That should give it a clock and I
>> should be able to schedule it using the phone. If I am away and need to
>> make a change I should be able to use the rPi to VNC headlessly to the
>> phone. Then I am thinking screen shots requested by the slow connection
>> and forwarded to the sshfs share over the hot spot. I'll have to make sure
>> I set the Shelly up with a static IP, or I'll never find it, since the
>> phone, the only thing that could see it, won't nmap or tell me what is
>> connected to it.
>>
>> Thoughts
>>
>> Having a few old phones and access to $10/month plans, it would be nice
>> to just be able to access a phone from the world. It would be easy to
>> monitor and perhaps control things at remote locations for cheap. I've
>> used phones this way before, but they were alway on WiFi and so I had
>> access. When they are the hot spot/AP, things get all jacked up. As an
>> aside:I hate IoT.
>>
>> If anyone has any thoughts, comments, or suggestions, I would welcome
>> them.
>>
>> If you read this far, I hope it was entertaining.
>>
>> Final thought
>>
>> After rereading this, I think I could just replace the Shelly with an
>> X-10 light switch. Install the controller on the rPi and control it with a
>> cron job. I could make any changes using the slow connection from the
>> house. Or alternatively, I could use the native WiFi interface on the rPi
>> as an Ad Hoc/AP for the Shelly. I did try this, but it didn't work. But
>> I've upgraded the OS on the rPi to bookworm from stretch since then. Maybe
>> that will address some of the issues. I was using my laptop to test and I
>> think I was having version compatiblity issues.
>>
>> Thanks.
>>
>> Full circle
>>
>> -Gary
>>
>> _______________________________________________
>> Lug-nuts mailing list -- lug-nuts(a)bigbrie.com
>> To unsubscribe send an email to lug-nuts-leave(a)bigbrie.com
>>
>
_______________________________________________
Lug-nuts mailing list -- lug-nuts(a)bigbrie.com
To unsubscribe send an email to lug-nuts-leave(a)bigbrie.com
----- End forwarded message -----
I hope you find this entertaining.
I have a very simple problem. I have a secondary structure on my property some distance from my house. It has a light that I want to come on sometime after sunset and turn off sometime before dawn.
There are a few issues.
1. The light is visible from the road, so it should look nice. Adding a socket with a day night sensor isn't possible. It won't fit inside the current lighting fixture.
2. The WiFi from the house does reach this structure, but it isn't very strong. My laptop can pick it up just fine, but the Shelly home automation switch I bought doesn't see it.
3. I have an extra phone that I use only for 2 factor authentication and a few other minor uses. I have a $10/month plan for that phone.
Note: The Shelly is installed. It can't see any WiFi, so it won't let me set up a schedule because it can't see a clock. Not withstanding the fact that I could tell it what the time is and even $0.20 chips have a reasonably accurate clock. We aren't flying planes or running nuclear reactors here. But it will let me tell it how long to wait after I turn it on to turn it off. This uses a clock, but I guess it slipped through. It's from Romania. I manually turn the light on every evening.
Plan 1
Move the second phone to the secondary structure and just use VNC to get any messages. Turn on the hot spot and have the Shelly get the time from that.
Result: I abandonded this plan when I couldn't VNC into the phone from the world. Lo and behold, this only works if you access the phone using WiFi. Since I want to use the hotspot, this means being connected to the phone's hot spot. Which means I have to be there, which defeats the whole purpose.
Plan 2
Set up my rPi on the hot spot from the phone. Use a remote ssh tunnel to access the rPi and then access the phone.
Result: The remote tunnel is blocked. I only did some brief reading, but you have to do some packet inspection to do this.
Plan 3
Use the slow network from the house to contact the rPi on a second external and good antenna. Use the rPi's native antenna to contact the phone.
Result: This works. But it is incredibly slow. The clock on the phone that I see when using vnc updates every 5 minutes. But despite this, it seemed pretty stable. Not really workable though.
Note: Although an ssh remote tunnel won't work, sshfs apparently will. I wouldn't have guessed that.
Note: Devices that are using the phone's hot spot can't see each other. They can only see the phone. This would mean that if I connected the Shelly to the hot spot, I wouldn't be able to see it from another device, like the rPi that I can talk to from my house. However, the phone can see all of the connected devices. And the rPi can VNC to the phone.
Next plan
Connect the Shelly to the hot spot. That should give it a clock and I should be able to schedule it using the phone. If I am away and need to make a change I should be able to use the rPi to VNC headlessly to the phone. Then I am thinking screen shots requested by the slow connection and forwarded to the sshfs share over the hot spot. I'll have to make sure I set the Shelly up with a static IP, or I'll never find it, since the phone, the only thing that could see it, won't nmap or tell me what is connected to it.
Thoughts
Having a few old phones and access to $10/month plans, it would be nice to just be able to access a phone from the world. It would be easy to monitor and perhaps control things at remote locations for cheap. I've used phones this way before, but they were alway on WiFi and so I had access. When they are the hot spot/AP, things get all jacked up. As an aside:I hate IoT.
If anyone has any thoughts, comments, or suggestions, I would welcome them.
If you read this far, I hope it was entertaining.
Final thought
After rereading this, I think I could just replace the Shelly with an X-10 light switch. Install the controller on the rPi and control it with a cron job. I could make any changes using the slow connection from the house. Or alternatively, I could use the native WiFi interface on the rPi as an Ad Hoc/AP for the Shelly. I did try this, but it didn't work. But I've upgraded the OS on the rPi to bookworm from stretch since then. Maybe that will address some of the issues. I was using my laptop to test and I think I was having version compatiblity issues.
Thanks.
Full circle
-Gary
Is this thing working?
--
Brian Lavender
http://www.brie.com/brian/
"There are two ways of constructing a software design. One way is to
make it so simple that there are obviously no deficiencies. And the other
way is to make it so complicated that there are no obvious deficiencies."
Professor C. A. R. Hoare
The 1980 Turing award lecture
list working?
--
Brian Lavender
http://www.brie.com/brian/
"There are two ways of constructing a software design. One way is to
make it so simple that there are obviously no deficiencies. And the other
way is to make it so complicated that there are no obvious deficiencies."
Professor C. A. R. Hoare
The 1980 Turing award lecture
I found a page for doing proxy between Apache httpd and Apache Tomcat.
https://tomcat.apache.org/tomcat-9.0-doc/proxy-howto.html
--
Brian Lavender
http://www.brie.com/brian/
"There are two ways of constructing a software design. One way is to
make it so simple that there are obviously no deficiencies. And the other
way is to make it so complicated that there are no obvious deficiencies."
Professor C. A. R. Hoare
The 1980 Turing award lecture
tt seems like phones are locked down pretty tight. For example, it doesn't seem like you can vnc into the phone unless you are on the phones hot spot. Not only that, you can't use a remote ssh tunnel either, which kind of surprised me. I've take care to confirm that the firewall and SE Lonux settings would allow access to the required/specified ports.
Is this right? Is there a way around?
I have a location that doesn't have wifi on it's own and don't want to pay full rate just so I can occasionally access a little home automation.
-Gary
When I tried updating the mailing list server, I got /dev/enX0 for the
ethernet! Ugh. I found these documents on the interfaces.
https://wiki.debian.org/NewInBuster#Network_interface_name_migration
Anyone else encounter issues?
Brian
--
Brian Lavender
http://www.brie.com/brian/
"There are two ways of constructing a software design. One way is to
make it so simple that there are obviously no deficiencies. And the other
way is to make it so complicated that there are no obvious deficiencies."
Professor C. A. R. Hoare
The 1980 Turing award lecture
