17 May
17 May
6:01 p.m.
Hi Chris,
I have used a heat gun to do it. You will need either the guitar pick or
the prying tool. The youtube videos seem to show the technique pretty
well. Batteries plus may do it for you. You might check with them.
Brian
On Sun, May 14, 2023 at 06:11:17PM -0700, Chris Miller wrote:
Hi Folks,
I think I would benefit from changing the battery on my cell phone. The
first step is to remove the screen, which is glued on. This glue can be
heated, which softens it and releases the hold on the screen to the
point where the screen can be removed.
My question is, what temperature do I need to achieve and how long do I
need to hold it for the glue to release the screen?
Thanks for the help,
Chris.
Laboriously sent to you from my ... do you really care?
_______________________________________________
Lug-nuts mailing list -- lug-nuts(a)bigbrie.com
To unsubscribe send an email to lug-nuts-leave(a)bigbrie.com
--
Brian Lavender
http://www.brie.com/brian/
"There are two ways of constructing a software design. One way is to
make it so simple that there are obviously no deficiencies. And the other
way is to make it so complicated that there are no obvious deficiencies."
Professor C. A. R. Hoare
The 1980 Turing award lecture
599
days inactive
601
days old
1 comments
2 participants
participants (2)
-
Brian E. Lavender -
Chris Miller